 |
Carus Corporation Peru, IL U.S.A Tel + 1 815 223 1500 Fax + 1 815 224 6697 |
Carus Eruope Asturias, Spain Tel + 34 985 78 55 13 Fax + 34 985 78 55 10 |
Web: www.caruscorporation.com Email: salesmkt@caruscorporation.com 1 800 435 6856 (Toll free US Only) |
 |
CARUS™
CARUS™
SLURRY TWO™ is a lime slurry conditioning agent used to prevent caking and plugging of lime feed equipment. Apply SLURRY TWO™ whenever caking and plugging of lime or alkaline water treatment chemicals is a concern. Applied at the lime feeder source, SLURRY TWO™ can prevent costly excavation, replacement, and cleaning of chemical feed lines in difficult to reach locations.
BENEFITS
- Keep lime slaker operating and transfer lines clean
- Maintain free flowing lime slurry for consistent water treatment
- Minimize calcium scale deposits and plugging of feed equipment
- Less down time, cleaning, and replacement of lime feed lines
- Compatible with lime soda softening, soda ash, and caustic feed water systems
PROPERTIES AND CERTIFICATIONS
- Clear homogenous liquid
- Viscosity <2 cps at 70º C
- Approximate shelf life = 6 months
- Freezing Point 23º F
- NSF maximum feed rate 22 mg/L
- Specific Gravity 1.4 ± 0.03
- pH (1% solution) > 6.9
- Certified to ANSI/NSF Standard 60
- Density 11.7 ± 0.03 pounds per gallon
APPLICATION
SLURRY TWO™ is injected with the make up water or dripped into a chemical mixer or feed line located near the lime slaker. Dosing is calculated based on the concentration of lime in the slurry or solution mixture.
